| Description |
Price * |
Image |
Specs |
Datasheet |
Schema, pcb and netlist |
|
__________ |
__________ |
____________________ |
__________ |
__________ |
|
|
|
| Complete systems |
|
|
|
|
|
|
openbts-desktop-kit U210SWBX-CTGPS-K1
|
€ 2553.00 |  |
OpenBTSDesktopTestingKit |
See individual items below for datasheets. |
OpenBTSUHD |
| openbts-desktop-kit-U210SWBX-CTGPS-K1: With GPS-sync. UHD driver. Complete assembled and tested OpenBTS Desktop Development Kit containing modified USRP-N210, WBX, clocktamer-1.2 with GPS-sync, (=configurable precise GPS-locked 10 Mhz clocksource), all needed internal cables, 1 GPS antanna, 2 GSM antennas, 2 programmable SIM cards, poweradapter, gigabit ethernet cable. Works with OpenBTSUHD and latest standard OpenBTS.
Due to the GPS sync, this system is continuously automatically calibrated. This results in very precise frequencies which are important for the correct working of a GSM network. |
|
openbts-desktop-kit U210SWBX-GPSDO-N1
|
€ 2973.00 | |
OpenBTSDesktopTestingKit |
See individual items below for datasheets. |
OpenBTSUHD |
| openbts-desktop-kit-U210SWBX-GPSDO-N1: UHD driver, GPS locked. Complete assembled and tested OpenBTS Desktop Development Kit containing modified USRP-N210, WBX, GPSDO (=very precise
GPS synced internal 10 Mhz clock and 1 PPS source), all needed internal cables, 1 terminator 50 Ohm SMA, 2 GSM antennas, 2 programmable SIM
cards, poweradapter, gigabit ethernet cable. Works with OpenBTSUHD and latest standard OpenBTS.
Due to the GPS sync, this system is continuously automatically calibrated. This results in very precise frequencies which are important for the correct working of a GSM network. The GPSDO also keeps the USRP internal timestamp time in sync with GPS-time |
|
openbts-desktop-kit U1DRFX-A1
|
€ 1973.00 |  |
OpenBTSDesktopTestingKit |
See individual items below for datasheets. |
|
| openbts-desktop-kit-U1DRFX-A1: Complete assembled and tested OpenBTS Desktop Development Kit containing modified USRP-1 , clocktamer (=configurable 52 Mhz clocksource), 2*RFX1800 (reprogrammable as rfx900),all needed internal cables, 1 terminator 50 Ohm SMA, 2 GSM antennas, 2 programmable SIM cards (we can program them for you if you want, specify wanted IMSI, MCC, MNC with your order), poweradapter, usb-cable.
This setup uses the gnuradio based USRP driver (not the UHD driver) and should work both old and new OpenBTS releases. |
|
openbts-desktop-kit U1DRFX-CTGPS-B1
|
€ 2053.00 | |
OpenBTSDesktopTestingKit |
See individual items below for datasheets. |
|
| openbts-desktop-kit-U1DRFX-CTGPS-B1: With GPS-sync. Complete assembled OpenBTS Desktop Development Kit containing modified USRP-1 , clocktamer with GPS (=configurable builtin precise GPS-synced 52 Mhz clocksource), 2 x RFX1800 (reprogrammable as rfx900), all needed internal cables, 2 GSM antennas, 50 Ohm terminator (SMA), 2 programmable SIM cards, poweradapter, usb-cable.
Due to the GPS sync, this system is continuously automatically calibrated. This results in very precise frequencies which are important for the correct working of a GSM network.
This setup uses the gnuradio based USRP driver (not the UHD driver) and should work both old and new OpenBTS releases.
|
|
|
|
| Motherboards |
|
|
|
|
|
|
usrp1-pkg
|
€ 650.00 |  |
USRP Wiki |
USRP datasheet |
USRP Schematics PDF |
USRP Schematics CAD (gEda) rev 11655 |
| USRP1-PKG: USRP
Motherboard, including metal casing, 2 internal SMA-M to SMA-F bulkhead
cables, USB cable, power supply and Hardware Package. |
| UB100D-BDL: USRP Instant SDR Kit
|
€ 640.00 |  |
|
|
|
|
| The UB100D-BDL includes USRP B100, WBX Daughterboard (RX+TX 50 - 2200 MHz), LiveUSB SDR environment, 2 SMA-Bulkhead Cables, 1 USB Cable, Power Supply
The USRP™ (Universal Software Radio Peripheral) Instant SDR kit is an off-the-shelf package of hardware and software that sets new industry standards in terms of price, performance and most of all "ease-of-use". Customers ordering Instant SDR will be up and running in 5 minutes or less.
The Instant SDR Kit includes:
USRP B100 - UHD-powered device with USB 2.0 interface
WBX Daughterboard – Transmit and Receive from 50 MHz to 2.2 GHz
LiveUSB SDR Environment – drivers, software, and development tools on a bootable 16 GB USB drive
NOTE: The only extra thing you will need is an antenna and your computer. See the rest of this pricelist to choose your desired antenna.
Technical features:
B100: USB 2.0 interface, Xilinx Spartan 3A-1400 FPGA, Compatibility with our entire daughterboard family, Fully supported by UHD drivers, Dual 64 MS/s 12-bit ADCs, Dual 128 MS/s 14-bit DACs, Onboard TCXO, 10 MHz and 1 PPS inputs for external frequency and time references, Flexible clocking from 10 MHz to 64 MHz, 8 MHz of RF bandwidth with 16 bit samples.
WBX: Transmit and receive, frequency 50 - 2200 Mhz.
LiveUSB: Bootable 16 GB USB3 flashdrive
|
| UB100A-BDL: USRP B100 & SBX Bundle
|
€ 805.00 | |
|
|
|
|
| The UB100A-BDL includes USRP B100, SBX Daughterboard (RX+TX 400 - 4400 MHz), 2 SMA-Bulkhead Cables, 1 USB Cable, Power Supply
The USRP B100 is a new member of the USRP family that offers the flexibility of the USRP product line at an attractive price point for cost-sensitive software radio applications. The USRP B100 can stream up to 8 MS/s through the USB 2.0 host interface. The USRP B100 provides flexible clocking that can be adjusted to meet the needs for specific applications.
Technical features:
B100: USB 2.0 interface, Xilinx Spartan 3A-1400 FPGA, Compatibility with our entire daughterboard family, Fully supported by UHD drivers, Dual 64 MS/s 12-bit ADCs, Dual 128 MS/s 14-bit DACs, Onboard TCXO, 10 MHz and 1 PPS inputs for external frequency and time references, Flexible clocking from 10 MHz to 64 MHz, 8 MHz of RF bandwidth with 16 bit samples.
SBX: Transmit and receive, frequency 400 - 4400 Mhz.
|
|
UB100-KIT
|
€ 615.00 | |
|
USRP B100 datasheet |
|
|
| USRP B100 Kit: includes USRP B100, 2 SMA-Bulkhead Cables, 1 USB Cable, Power Supply, and Hardware Package.
features:
USB 2.0 interface, Xilinx Spartan 3A-1400 FPGA, Compatibility with our entire daughterboard family, Fully supported by UHD drivers, Dual 64 MS/s 12-bit ADCs, Dual 128 MS/s 14-bit DACs, Onboard TCXO, 10 MHz and 1 PPS inputs for external frequency and time references, Flexible clocking from 10 MHz to 64 MHz, 8 MHz of RF bandwidth with 16 bit samples, 16 MHz of RF bandwidth with 8 bit samples.
|
|
un210
|
€ 1610.00 | |
USRP2 Wiki |
USRP N210 datasheet |
|
|
| USRP-N210-Kit: includes USRP N210, enclosure, 2 RF Cables, Ethernet Cable, Power Supply, and Hardware Package. |
|
|
|
| Clockgenerators |
|
|
|
|
|
|
ClockTamer-1.2
|
€ 210.00 |  |
ClockTamer project web-site |
FeaturesAndTechnicalSpecification |
ClockTamer-1.2 Schematics |
|
| ClockTamer with 1 CMOS output. CLocktamer is a low-cost small-size configurable clock generator. It is was specifically designed to be used as a configurable clocksource for USRP. It is mostly used as precise 52 MHz clocksource for the USRP but nothing prevents you from using it with other devices or on other frequencies.
ClockTamer is an Open-Source Software and an Open-Source Hardware (OSH) project. All schematics, bill of materials and components placement are published at ClockTamer project web-site.
|
|
ClockTamer-1.2-GPS
|
€ 290.00 | |
ClockTamer project web-site |
FeaturesAndTechnicalSpecification |
ClockTamer-1.2 Schematics |
|
| Clocktamer with GPS unit (for automatic freq. calibration) and 2 CMOS outputs. CLocktamer is a low-cost small-size configurable clock generator. It is was specifically designed to be used as a configurable clocksource for USRP. It is mostly used as precise 52 MHz clocksource for the USRP but nothing prevents you from using it with other devices or on other frequencies.
ClockTamer is an Open-Source Software and an Open-Source Hardware (OSH) project. All schematics, bill of materials and components placement are published at ClockTamer project web-site.
|
|
|
|
|
|
|
|
|
|
| Daughterboards (RF front-end) |
|
|
|
|
|
|
|
|
|
|
|
|
BasicTX
|
€ 72.00 |  |
2 MHz to 200 MHz Transmitter |
basicTX datasheet |
basicTX Schematics PDF |
basicTX Schematics CAD (gEda) rev 11655 |
| |
|
BasicRX
|
€ 72.00 |  |
2 MHz to 300+ MHz Receiver |
basicRX datasheet |
basicRX Schematics PDF |
basicRX Schematics CAD (gEda) rev 11655 |
| |
|
LFTX
|
€ 72.00 |  |
DC-30 MHz Transmitter |
LFTX datasheet |
LFTX Schematics PDF |
LFTX Schematics CAD (gEda) rev 11655 |
| |
|
LFRX
|
€ 72.00 |  |
DC-30 MHz Receiver |
LFRX datasheet |
LFRX Schematics PDF |
LFRX Schematics CAD (gEda) rev 11655 |
| |
|
TVRX2
|
€ 184.00 |  |
Dual 50 to 860 MHz Receiver. (UHD Driver support only.) |
TVRX2 datasheet |
TVRX2 Schematics PDF |
|
| |
|
TVRX
|
€ 125.00 |  |
(Obsolete) 50 MHz to 870 MHz Receiver |
TVRX datasheet |
TVRX Schematics PDF |
TVRX Schematics CAD (gEda) rev 11655 |
| |
|
DBSRX2
|
€ 145.00 |  |
800 MHz to 2.4 GHz Receiver (UHD Driver support only.) |
DBSRX2 datasheet |
DBSRX2 Schematics (.pdf) |
DBSRX2 Schematics (.sch) |
| |
| |
|
RFX900
|
€ 260.00 |  |
800-1000MHz Transceiver, 200+mW output |
RFX900 datasheet |
RFX900 Schematics PDF |
RFX900 Schematics CAD (gEda) rev 11655 |
| |
|
RFX1200
|
€ 255.00 |  |
1150 MHz - 1450 MHz Transceiver, 200+mW output |
RFX1200 datasheet |
RFX1200 Schematics PDF |
RFX1200 Schematics CAD (gEda) rev 11655 |
| |
|
RFX1800
|
€ 255.00 |  |
1.5-2.1 GHz Transceiver, 100+mW output |
RFX1800 datasheet |
RFX1800 Schematics PDF |
RFX1800 Schematics CAD (gEda) rev 11655 |
| |
|
RFX2400
|
€ 255.00 | |
2.3-2.9 GHz Transceiver, 50+mW output |
RFX2400 datasheet |
RFX2400 Schematics PDF |
RFX2400 Schematics CAD (gEda) rev 11655 |
| |
|
XCVR2450
|
€ 425.00 |  |
2.4-2.5 GHz and 4.9 to 5.85 GHz Dual-band Transceiver. |
XCVR2450 datasheet |
XCVR2450 Schematics PDF |
| |
|
WBX
|
€ 425.00 |  |
50 MHz to 2.2 GHz Transceiver. (Note: Not for use with USRP1 with serial number lower then 500.) |
WBX datasheet |
WBX Schematics PDF |
| |
|
SBX
|
€ 450.00 |  |
400 MHz to 4.4 GHz Transceiver. (UHD Driver support only.) |
SBX datasheet |
SBX Schematics PDF |
| |
|
|
|
|
|
|
|
|
|
| Antennas |
|
|
|
|
|
|
|
|
|
|
|
|
LP0926
|
€ 22.00 |  |
LP0926 900 MHz tot 2.6 GHz Log Periodic PCB Antenne, 5-6dBi Gain, Ideal for DBSRX |
LP0926 DatasheetPlease note that you need a sma-sma cable or sma-sma remi-rigid to connect this antenna to a usrp |
| |
|
LP0965
|
€ 32.00 |  |
LP0965 900 MHz tot 6.5 GHz Log Periodic PCB Antenne, 5-6dBi Gain, Ideal for SBX or XCVR2450 |
LP0965 Datasheet Please note that you need a sma-sma cable or sma-sma remi-rigid to connect this antenna to a usrp |
| |
|
VERT900
|
€ 32.00 |  |
824-960MHz, 1710-1990 MHz Quad-band GSM/Cellular/PCS and ISM Band Vertical Antenna, 3dBi Gain, 9 Inches, Ideal for RFX900 and RFX1800. |
| |
|
VERT400
|
€ 32.00 |  |
144MHz, 400 MHz, and 1200 MHz Tri-band 7-inch vertical antenna, Ideal for RFX400 and RFX1200 |
| |
|
VERT2450
|
€ 32.00 |
|
Dual Band 2400-2480 Mhz and 4.9-5.9 Ghz Vertical Antenne, 3dBi Gain, Ideal for RFX2400 and XCVR2450 |
| |
|
|
|
|
|
|
|
|
|
| Accessories |
|
|
|
|
|
|
|
|
|
|
|
|
smabnc60
|
€ 19.50 |
| SMA-M to BNC-M Cable (60 cm) |
|
smasma60
|
€ 19.50 |
| SMA-M to SMA-M Cable (60 cm) |
|
smasma25
|
€ 19.50 |  |
SMA-M-SMA-M-25cm.txt |
| SMA-M to SMA-M Cable (25 cm) |
|
sma_bulkhead
|
€ 19.50 |
| Extra SMA-M to SMA-F bulkhead cable for use of most daughterboards in casing. |
|
f_bulkhead
|
€ 19.50 |
| Extra F connector to SMA-F bulkhead connector for use of TVRX in casing. |
|
mcx_bulkhead
|
€ 19.50 |
| Extra MCX connector to SMA-F bulkhead connector for WBX daughterboard |
|
|
|
|
|
|
